21 Best Blade Blanks in 2019

 

Upswept Skinner Damascus Knife Blank Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting
Upswept Skinner Damascus Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting
Upswept Skinner Damascus Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting - Solid brass guard brass guard will require additional buffing and/or polishing brass bolster is fixed to the blank with brass pins. Blade comes sharpened a final edge may be applied for an even sharper razor edge. 975 inches approximate overall length, 47 inches approximate blade length, 40 inches approximate handle length, 1375 inches widest part of blank, 1125 inches widest part of handle, 4mm (1/8 inch) thick approximately. High quality damascus construction 1095 high carbon and 15n20 nickel (over 200 layers). Raindrop damascus pattern.

 

Full Tang 6 Riverboat Bowie Blade Blank
Full Tang 6″ Riverboat Bowie Blade Blank
Full Tang 6″ Riverboat Bowie Blade Blank - Full tang. Brass guard. 6″ bowie blade. Knifemaking blade bowie hunter10 3/8″ overall.

 

Morakniv No 2000 Stainless Steel 45 Inch Knife Blade Blank
Morakniv No. 2000 Stainless Steel 4.5 Inch Knife Blade Blank
Morakniv No. 2000 Stainless Steel 4.5 Inch Knife Blade Blank - Mora knives are made from high-quality sandvik steel. Morakniv knife blade blanks are an excellent choice for anybody wishing to make their own custom knife. 5-inch sandvik stainless steel blade which is ideally suited for hunting, fishing, and outdoor applications where knives see hard use and are commonly exposed to dirt and moisture. The morakniv no. Professionals worldwide trust the quality materials and fine craftsmanship of morakniv. Sandvik knife steels are characterized by ultra-fine carbides that result in superb forging and hardening properties. Morakniv has been manufacturing the highest-quality knives in mora, sweden since 1891. The absence of large carbide deposits promotes excellent edge sharpness for optimum cutting performance. Knife blade blank only, does not include handle or sheath. The chromium content of stainless steel makes them less susceptible to corrosion and oxidation than carbon steels, giving them a longer life overall. 2000 knife blade blank features a 4.

 

Partial Tang Wide Hunting Skinner Damascus Blank Blanks Blade Knife Knives Making High Carbon Steel
Partial Tang Wide Hunting Skinner Damascus Blank Blanks Blade Knife Knives Making High Carbon Steel
Partial Tang Wide Hunting Skinner Damascus Blank Blanks Blade Knife Knives Making High Carbon Steel - Raindrop damascus pattern. Blade comes sharpened a final edge may be applied for an even sharper razor edge. Dimensions 80 inches approximate overall length, 3625 inches approximate cutting edge length, 3625 inches approximate handle length (partial tang), 1375 inches widest part of blade, 06 inches widest part of handle, approximately 4mm thick (1/8 inch). High quality, one-piece damascus construction 1095 high carbon steel and 15n20 steel. Partial tang wide hunting skinner damascus blank blanks blade knife knives making high carbon steel.

 

SZCO Supplies Tiger Skinner Blade Blank Knife brass
SZCO Supplies Tiger Skinner Blade Blank Knife, brass
SZCO Supplies Tiger Skinner Blade Blank Knife, brass - This tiger skinner blade blank by szco supplies is 6. This stainless steel blade comes with a brass guard. 5 inch blade is a push tang blade. This 4. 5 inches in overall length.

 

Morakniv No95 Stainless Steel 37 Inch Knife Blade Blank
Morakniv No.95 Stainless Steel 3.7 Inch Knife Blade Blank
Morakniv No.95 Stainless Steel 3.7 Inch Knife Blade Blank - Mora knives are made from high-quality sandvik steel. Professionals worldwide trust the quality materials and fine craftsmanship of morakniv. Morakniv has been manufacturing the highest-quality knives in mora, sweden since 1891. The morakniv no. Knife blade blank only, does not include handle or sheath. The chromium content of stainless steel makes them less susceptible to corrosion and oxidation than carbon steels, giving them a longer life overall. 7-inch sandvik stainless steel blade which is ideally suited for hunting, fishing, and outdoor applications where knives see hard use and are commonly exposed to dirt and moisture. Sandvik knife steels are characterized by ultra-fine carbides that result in superb forging and hardening properties. 95 knife blade blank features a 3. The absence of large carbide deposits promotes excellent edge sharpness for optimum cutting performance. Morakniv knife blade blanks are an excellent choice for anybody wishing to make their own custom knife.

 

Damascus Tactical Tanto High Carbon Steel Japanese Blank Blade Knife Knives Samurai
Damascus Tactical Tanto High Carbon Steel Japanese Blank Blade Knife Knives Samurai
Damascus Tactical Tanto High Carbon Steel Japanese Blank Blade Knife Knives Samurai - High quality damascus construction 1095 high carbon and 15n20 nickel (over 200 layers). Dimensions 975 inches approximate overall length, 46 inches approximate blade length, 50 inches approximate handle length, 145 inch widest part of blade, 12 inches widest part of handle, approximately 4mm thick (1/8 inch). Raindrop damascus pattern. Damascus tactical tanto high carbon steel japanese blank blade knife knives samurai. Blade comes sharpened a final edge may be applied for an even sharper razor edge.

 

Damascus High Carbon Steel Tanto Hunting Blank Blade Knife Knives Japanese Samurai Custom Making
Damascus High Carbon Steel Tanto Hunting Blank Blade Knife Knives Japanese Samurai Custom Making
Damascus High Carbon Steel Tanto Hunting Blank Blade Knife Knives Japanese Samurai Custom Making - Damascus high carbon steel tanto blank blade knife knives japanese samurai custom making. Raindrop damascus pattern. High quality damascus construction 1095 high carbon and 15n20 nickel (over 200 layers). Blade comes sharpened a final edge may be applied for an even sharper razor edge. Dimensions 9 inches approximate overall length, 5 inches approximate blade length, 3 3/4 inches approximate handle length, 10 inch widest part of blank, approximately 4mm thick (1/8 inch).

 

Clip Point D2 D-2 Steel Knife Blank Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting
Clip Point D2 D-2 Steel Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting
Clip Point D2 D-2 Steel Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting - Solid brass guard brass guard will require additional buffing and/or polishing brass bolster is fitted to the tang brass pins are not required to attach the guard your handle will hold the brass guard in place. Quality d-2 steel, one-piece construction. Blade comes sharpened a final edge may be applied for an even sharper razor edge. 8125 inches approximate overall length, 45 inches approximate blade length, 275 inches approximate handle length, 113 inches widest part of blank, 05 inches widest part of handle, 4mm (1/8 inch) thick approximately. D-2 is a high-carbon tool steel, capable of holding a sharp edge for a long period of time it is also much more resistant to corrosion than 1095 d-2 is called “semi-stainless”, because it offers more stainless properties than high carbon steels, but it is also much tougher than premium stainless steels d-2 has high wear-resistance and abrasion-resistance properties.

 

Hunting Knife Blade Blank 014 - 440C Steel - 7 78 OAL
Hunting Knife Blade Blank 014 – 440C Steel – 7 7/8″ OAL
Hunting Knife Blade Blank 014 – 440C Steel – 7 7/8″ OAL - We suggest adding a pair of g10 scales in 3/16″ or 1/4″ thick material for the handle. These knife blanks are already heat treated and hardened. All you need to do is add a handle and maybe a sheath. You could also add some handsome wood scales from our extensive assortment or even from your own stock.

 

Set of 2 Blades for Knife Making 5 14 7 12 Mini Hunter Blank Custom Game Hunting Blanks Skinning Knives
Set of 2 Blades for Knife Making (5 1/4″ & 7 1/2″) Mini Hunter Blank Custom Game Hunting Blanks Skinning Knives
Set of 2 Blades for Knife Making (5 1/4″ & 7 1/2″) Mini Hunter Blank Custom Game Hunting Blanks Skinning Knives - Blank #1 dimensions 75 inches approximate overall length, 45 inches approximate blade length, 225 inches approximate tang (handle) length, 0785 inches widest part of blade, 5/16 inch widest part of handle, approximately 4mm thick (1/8 inch). Blank #2 dimensions 5125 inches approximate overall length, 35 inches approximate blade length, 15 inches approximate tang (handle) length, 0625 inches widest part of blade, 025 inch widest part of handle, approximately 4mm thick (1/8 inch). Set of 2 blades for knife making (5 1/4″ & 7 1/2″) mini hunter blank custom game hunting blanks skinning hunting knives. Blade comes sharpened a final edge may be applied for an even sharper razor edge comes individually wrapped in bulk packaging. High quality, polished 420 stainless steel construction.

 

Damascus Blank Upswept Curved Skinning Skinner Blade Hunting Hunter 1095HC
Damascus Blank Upswept Curved Skinning Skinner Blade Hunting Hunter 1095HC
Damascus Blank Upswept Curved Skinning Skinner Blade Hunting Hunter 1095HC - High quality damascus construction 1095 high carbon and 15n20 nickel (over 200 layers). Dimensions 725 inches approximate overall length, 325 inches approximate blade length, 375 inches approximate handle length, 15 inches widest part of blank, approximately 4mm thick (1/8 inch). Blade comes sharpened a final edge may be applied for an even sharper razor edge. Damascus blank upswept curved skinning skinner blade hunting hunter 1095hc. Raindrop damascus pattern.

 

Condor Tool Knife Kephart Blade Blank 4-12in Blade
Condor Tool & Knife, Kephart Blade Blank, 4-1/2in Blade
Condor Tool & Knife, Kephart Blade Blank, 4-1/2in Blade - The kephart blank weighs. This blade blank has an overall length of 9″ with a blade length of 4 1/2″. Condor will allow you to take the 3. 0mm blade that is made out of 1075 high carbon steel and create a unique “one of a kind” knife. Condor took one of the best selling knives “the kephart” and made it possible for you to create your own custom knife. 20 lbs.

 

Guthook Damascus High Carbon Steel Large Blank Blanks Blade Hunting Knife Knives Making
Guthook Damascus High Carbon Steel Large Blank Blanks Blade Hunting Knife Knives Making
Guthook Damascus High Carbon Steel Large Blank Blanks Blade Hunting Knife Knives Making - Blade comes sharpened a final edge may be applied for an even sharper razor edge. Dimensions 9 inches approximate overall length, 35 inches approximate blade length, 5 inches approximate handle length, 20 inches widest part of blade, 1375 inches widest part of handle, approximately 4mm thick (1/8 inch). High quality damascus construction 1095 high carbon steel and 15n20 steel. Raindrop damascus pattern. Guthook damascus high carbon steel large blank blanks blade hunting knife knives making.

 

Large Drop Point D-2 D2 Knife Blank Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting
Large Drop Point D-2 D2 Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting
Large Drop Point D-2 D2 Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting - Solid brass guard brass guard will require additional buffing and/or polishing brass bolster is fixed to the blank with brass pins. 8 inches approximate overall length, 34 inches approximate blade length, 365 inches approximate handle length, 12 inches widest part of blank, 135 inches widest part of handle, 4mm (1/8 inch) thick approximately. D-2 is a high-carbon tool steel, capable of holding a sharp edge for a long period of time it is also much more resistant to corrosion than 1095 d-2 is called “semi-stainless”, because it offers more stainless properties than high carbon steels, but it is also much tougher than premium stainless steels d-2 has high wear-resistance and abrasion-resistance properties. Blade comes sharpened a final edge may be applied for an even sharper razor edge. Quality d-2 steel, one-piece construction.

 

Condor Tool Knife Bushlore Blade Blank 4-516in Blade
Condor Tool & Knife, Bushlore Blade Blank, 4-5/16in Blade
Condor Tool & Knife, Bushlore Blade Blank, 4-5/16in Blade - Bushlore blank weighs. This blade blank has an overall length of 9 5/16″ with a blade length of 4 5/16″. Condor took one of the best selling knives “the bushlore” and made it possible for you to create your own custom knife. 0mm blade that’s made out of the 1075 high carbon steel and create a unique “one of a kind” knife. 28 lbs. Condor will allow you to take the 3.

 

Large Clip Point 1095 High Carbon Steel Knife Blank Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting
Large Clip Point 1095 High Carbon Steel Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting
Large Clip Point 1095 High Carbon Steel Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting - Blade comes sharpened a final edge may be applied for an even sharper razor edge. 9 inches approximate overall length, 5125 inches approximate blade length, 2625 inches approximate handle length (partial tang), 10 inch widest part of blank, 05 inches widest part of handle, 4mm (1/8 inch) thick approximately. Quality 1095 high carbon steel, one-piece construction. Solid brass guard brass guard will require additional buffing and/or polishing brass bolster is fitted to the tang brass pins are not required to attach the guard your handle will hold the brass guard in place. Blood groove along both blade sides 1095 is a high carbon steel (not a stainless steel) and is commonly used in heavy duty tools it can carry an extremely sharp edge 1095 makes great steel for heavy duty choppers and survival knives because of its extreme durability and resistance to chipping, easy sharpening and edge retention it is much tougher than premium stainless steels.

 

Morakniv Classic No1 Stainless Steel 39 Inch Knife Blade Blank
Morakniv Classic No.1 Stainless Steel 3.9 Inch Knife Blade Blank
Morakniv Classic No.1 Stainless Steel 3.9 Inch Knife Blade Blank - Sandvik knife steels are characterized by ultra-fine carbides that result in superb forging and hardening properties. The absence of large carbide deposits promotes excellent edge sharpness for optimum cutting performance. Knife blade blank only, does not include handle or sheath. Mora knives are made from high-quality sandvik steel. 9-inch sandvik stainless steel blade which is ideally suited for marine, fishing, outdoor and construction applications where knives see hard use and are commonly exposed to dirt and moisture. The classic no. The chromium content of stainless steel makes them less susceptible to corrosion and oxidation than carbon steels, giving them a longer life overall. Morakniv knife blade blanks are an excellent choice for anybody wishing to make their own custom knife. Professionals worldwide trust the quality materials and fine craftsmanship of morakniv. Morakniv has been manufacturing the highest-quality knives in mora, sweden since 1891. 1 knife blade blank features a 3.

 

Large Clip Point Damascus Knife Blank Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting
Large Clip Point Damascus Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting
Large Clip Point Damascus Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting - 9 inches approximate overall length, 5125 inches approximate blade length, 2625 inches approximate handle length (partial tang), 10 inch widest part of blank, 05 inches widest part of handle, 4mm (1/8 inch) thick approximately. Solid brass guard brass guard will require additional buffing and/or polishing brass bolster is fitted to the tang brass pins are not required to attach the guard your handle will hold the brass guard in place. Blade comes sharpened a final edge may be applied for an even sharper razor edge. High quality damascus construction 1095 high carbon and 15n20 nickel (over 200 layers). Raindrop damascus pattern blood groove along both blade sides.

 

SW46 Knife Making Blade Blank Stonewash Dog Town Skinner
SW46 Knife Making Blade Blank Stonewash Dog Town Skinner
SW46 Knife Making Blade Blank Stonewash Dog Town Skinner - The dog town had become one of our most popular s series knife blanks. We recently visited yellowstone park in montana and were inspired to create a series of new, wilderness ready blades. It has a stonewash finish and comes hardened and sharpened. A must for any collection.

 

Condor Tool Knife Woodlaw Blade Blank 4in Blade
Condor Tool & Knife, Woodlaw Blade Blank, 4in Blade
Condor Tool & Knife, Woodlaw Blade Blank, 4in Blade - The kephart blank weighs. Condor took one of the best selling knives “the woodlaw” and make it possible for you to create your own custom knife. 0mm blade that’s made out of 1075 high carbon steel and create a unique “one of a kind” knife. This blade blank has an overall length of 8 1/2″ with a blade length of 4″. 22 lbs. Condor allows you to take the 3.